INTU FR COLLAR L SLIM

Intumescent pipe collar roll

Product description

The INTU FR COLLAR L SLIM flashing consists of a minimum of two layers of intumescent material, based on graphite with a nominal thickness of 2.0 mm and a width of 30 mm, placed in a steel casing made of 0.5 mm stainless steel sheet. The casing is equipped with fixing brackets by which the flange is fixed to the partition.

Fire resistance class up to EI 120
Protection of combustible pipes
For use in walls and floors
Quick installation and sealing of hard-to-reach passages
High degree of swelling
Enviromental Product Declaration EPD
Fire Protection Certificate VKF

Documents

Compliance

Test standard:
EN 1366-3 / EAD 350454-00-1104
European Technical Assessment:
ETA 24/0497 of 26/08/2024
Declaration of Performance:
DoP 2/2024
Certificate of Constancy of Performance:
1488-CPR-1130/W
Enviromental Product Declaration EPD
Fire Protection Certificate VKF

Availability

Product	Type	Delivery form	Pallet (pcs.)
INTU FR COLLAR L SLIM	Contents of set: Steel casing 2.52m, Intumescent filling 12m, Short fixing CLIP S – 20 pcs.	1 set	375
	Short fastening clamp “S”	1 set – 10 pcs.	N/A
	Long “L” mounting bracket	1 set – 10 pcs.	N/A

Application

INTU FR COLLAR L SLIM is a universal collar used for sealing installation penetrations of pipes, cables, and cable ducts, single or in bundles, passing through walls and ceilings.

Flexible walls

The wall should be at least 100 mm thick. It should be made with a facing of at least two plasterboards on both sides (total facing thickness on one side of the wall not less than 25 mm).

Rigid walls

The wall should be at least 100 mm thick. It should be made of concrete or masonry units with a density of not less than 450 kg/m³.

Rigid floor

The floor should be at least 150 mm thick. It should be made of concrete, reinforced concrete, cellular concrete, with a density of not less than 550 kg/m³.