INTU FR WRAP

Intumescent pipe wrap

Product description

INTU FR WRAP fire collars are made of graphite-based material that expands in the event of a fire, stopping its spread and forming a barrier that enables the partition to maintain integrity and insulation performance up to EI 240.

Fire resistance class up to EI 240
Protection of combustible pipes
For use in walls and floors
Quick installation and sealing of hard-to-reach passages
High degree of swelling
LEED & BREEAM Certification
Enviromental Product Declaration EPD
Fire Protection Certificate VKF

Documents

Compliance

Test standard:
EN 1366-3 / EAD 350454-00-1104
European Technical Assessment:
ETA-18/0593
Declaration of Performance:
DoP 1/2019
Certificate of Constancy of Performance:
1488-CPR-0722/W
LEED & BREEAM Certification
Enviromental Product Declaration EPD
Fire Protection Certificate VKF

Availability

Produkt	Type	Delivery form
INTU FR WRAP	32 mm	Box (50 pcs.)
	40 mm	Box (50 pcs.)
	55 mm	Box (50 pcs.)
	63 mm	Box (50 pcs.)
	75 mm	Box (50 pcs.)
	82 mm	Box (50 pcs.)
	110 mm	Box (50 pcs.)
	125 mm	Box (40 pcs.)
	160 mm	Box (20 pcs.)
	200 mm	Box (20 pcs.)

Application

INTU FR WRAP clamp is used for fire protection of plastic, composite, and multilayer composite pipes passing through fire-separating partitions, either individually or in bundles, as well as combustible and non-combustible pipes with insulation.

Flexible walls

The wall should be at least 100 mm thick. It should be constructed with a minimum of two plasterboards lining both sides.

Rigid walls

The wall should be at least 100 mm thick. It should be made of concrete or masonry units with a density of not less than 450 kg/m³.

Rigid floor

The floor should be at least 150 mm thick. It should be made of concrete, reinforced concrete, cellular concrete, with a density of not less than 550 kg/m³.