INTU FR BRICK

Intumescent fire stop brick

Product description

INTU FR BRICK is a polyurethane-based intumescent block for fire protection.
In the event of a fire, it expands to form a barrier that prevents the spread of flames and smoke, maintaining the partition’s integrity and insulation for up to EI 120.

Fire resistance class up to EI 120
For use in walls and floors
Protection of combustible pipe penetrations
Quick installation and sealing of hard-to-reach passages
Protection of installation penetrations for non-combustible pipes, cables, bundles of copper pipes Tubolit®Split
High degree of swelling

Documents

Compliance

Test standard:
EN 1366-3 / EAD 350454-00-1104
European Technical Assessment:
ETA-10/0431 and ETA-11/0206
Declaration of Performance:
DoP ZZ230-20180701
Certificate of Constancy of Performance:
0761-CPR-0187

Availability

Product	Type	Delivery form	Pallet (pcs.)
INTU FR BRICK	Block 200 x 144 x 60 mm	Box (18 pcs.)	450 (25x Box)

Application

INTU FR BRICK fire protection block is designed to protect installation penetrations, cables (and cable supporting structures), cable bundles, metal pipes, plastic pipes, Tubolit®Split copper pipe bundles. INTU FR BRICK is used for temporary or permanent fire resistance of flexible walls, rigid walls and rigid floors.

Flexible walls

The wall should be at least 94 mm thick. It should be made with a facing of at least two gypsum boards on both sides.

Rigid walls

The wall should be at least 100 mm thick. It should be made of concrete or masonry elements with a density of not less than 450 kg/m³.

Rigid floors

The floor should be at least 150 mm thick. It should be made of concrete, reinforced concrete, cellular concrete, with a density of not less than 450 kg/m³.